Regarding the question of how to arrange the reinforcement in steel decking, we will explain it in detail here. We will address the reinforcement calculation for steel decking in two parts: the top reinforcement (including negative moment reinforcement) and the bottom load-bearing reinforcement. The top reinforcement, also called distribution reinforcement or temperature reinforcement, mainly serves to resist the tensile stress generated in the direction perpendicular to the slab span by seasonal temperature changes and concrete shrinkage. Generally, the diameter of the reinforcement should not be less than 6mm, and the spacing should not exceed 250mm. The...

Due to the steel truss steel deck significantly reducing on-site steel bar binding work, accelerating construction progress, and enhancing construction safety guarantees, it has a very wide application in factory and civil housing construction. To ensure construction safety, we need to carry out construction correctly in the following order and methods. Let's take a look! Steel Truss Steel Deck Installation Sequence 1)Construction sequence A. Plan construction sequence: The laying of each floor's steel truss steel deck should preferably be done starting from the construction drawing's initial position in one direction, and the edge and corner parts should be handled...

Steel deck, also known as steel deck panel, corrugated steel panel, floor deck, steel floor deck panel, composite floor deck panel, galvanized steel deck panel, galvanized floor deck panel, galvanized steel deck panel, composite steel deck panel, composite floor panel, architectural corrugated steel panel, composite floor panel, etc. Steel deck sheet is made by cold-rolling and forming galvanized steel panel, with its cross-section forming V-shape, U-shape, trapezoid, or similar wave shapes. It is primarily used as a permanent formwork and can also be selected for other purposes. APPLICATION OF STEEL DECK The product is widely used...