YX76-305-915 type steel decking is one of the open-rib decking models. It uses 1220mm wide galvanized coils, with common thicknesses of 0.75mm, 0.9mm, 1.0mm, and 1.2mm. After roll forming, the effective width is 915mm, with an effective utilization rate of 75%. The raw materials are sourced from manufacturers such as Tangshan Iron and Steel, Shougang Group, and Anshan Iron and Steel. It can be pressed into color-coated coils, galvanized coils, and stainless steel coils. YX76-305-915 type steel decking, also known as YX76-305-915 profiled steel sheet or YX76-305-915 steel decking, is commonly referred to as 915 type...

How much does one meter of profiled steel sheet cost? How much does one square meter of steel decking cost? These are very broad questions, but they are also the ones that most customers like to ask and are most concerned about. Based on Zhonggou New Materials' long-term observation and judgment, over 90% of customers who ask these questions right away are only concerned about price and do not pay much attention to the safety and quality of the project. So, how much does steel decking cost per square meter? To answer this, the customer needs to provide...

The cement thickness of steel structure steel decks is typically 120mm, which is the same as the 120mm thickness commonly used in many concrete structures. However, in certain special projects, the steel deck thickness may be thicker, such as in two- or three-story factories where a large amount of equipment needs to be housed, resulting in a heavier floor load and potential vibration loads. In such cases, the steel deck thickness is usually 150mm, and sometimes even reaches 200mm. Regarding vibration loads, Zhonggou New Materials will give you two small examples: For example, in parking garage projects, vehicles...